People Counting with Video Turnstile

Video Turnstile Installation Guide
People Counting Systems from Biodata Ltd

Installation Guide > Installing the Video Turnstile Units > Connecting the Video Turnstile Logger to the PC via Modem

Connecting the Video Turnstile Logger to the PC via Modem

Telling the Software about your Modem Link

  1. Make sure your Video Turnstile units are switched on.
  2. From the Windows Start menu, choose the Windmill 6.0 program group then select VT Setup.
  3. Choose the Unit Select tab.
  4. Select RS232/485 or Modem.
    VT Setup Software screen
  5. Enter the number of the COM port to which the modem is connected. Also enter the modem's dial-up number. Include only figures: not spaces, modem pause commas, etc. Remember to allow for additional dialling numbers, such as those required for external lines.
  6. Click the Connect button. This closes any existing communications link and opens a new one using the port specified.

You are now ready to use the VT Setup software to create a site.

Next: Using the VT Setup Software to Create a Site.