Installation Guide > Fine-tuning the Video Turnstile system with the VT Setup software
Fine-Tuning the Video Turnstile System
People Detection Settings Summary
- For Crowded Situations, consider changing these settings
- Timeout Restore to 1
MinSeparation to 3
Diagonal Splitting to 1
BlobMidSplit to 1
Double Probability to 1
- For Person Size, change these settings
- MinDetect
Typical Width
Typical Area
- For Queuing and Waiting, change these settings
- Lengthen the FreezeTime
Diagonal Splitting to 1
BlobMidSplit to 1
- For Dark Entrances, reduce this setting
- ThresholdLevel
- For Rapid Lighting Changes, change these settings
- Doors opening, for example, may cause changes to the light. If so consider reducing the Freeze Time and increasing the Threshold Level.
- For People Entering at One Point then Widely Dispersing
- On an escalator, for example, people may step off at a narrow point then disperse in all directions. Turn on the side exit lines and the splitting options — Diagonal Splitting and BlobMidSplit.
- For Cameras Mounted on Low Ceilings
- In this case people look very large in the picture. They may seem to break up and so you should turn off Diagonal Splitting (set to 0). Also turn off Double Probability and maybe BlobMidSplit.
